11 docs tagged with "Serial Control"

Control the AJA RovoCam from a Cyanview CI0 or RIO via RS-232 serial using the Sony VISCA protocol.

Control Canon Cinema EOS cameras from a Cyanview RCP via the Remote A serial protocol using a CI0 or RIO with the CY-CBL-6P-LANC-03 cable.

Control Dreamchip AtomOne and AtomTwo cameras from a Cyanview RCP over IP through a CI0 or RIO connected to the camera over a serial RS-485 link.

Control Ikegami HDK studio cameras from a Cyanview RCP via RS-422 serial using the ICPP protocol.

Control Marshall miniature cameras (CV-series) from a Cyanview RCP over RS-485 VISCA serial using a CI0 or RIO, supporting exposure, white balance, color correction, OSD navigation, and lens control.

Control older Panasonic P2 camcorders from a Cyanview RCP via RS-422 serial using a CI0 or RIO interface and the CY-CBL-6P-PAN-10P cable.

Control Proton mini cameras from a Cyanview RCP via RS-485 serial using a CI0 or RIO, with support for full paint, OETF, and tally.

Control Sony shoulder camcorders equipped with an 8-pin remote connector from a Cyanview CI0 or RIO for full serial camera control.

Control Sony FCB block cameras from a Cyanview RCP via VISCA RS-232 serial using a CI0 or RIO.

Control Sony camcorders and cinema cameras via the LANC protocol from a Cyanview CI0 or RIO for tally, menu navigation, and basic exposure control.

Control the Sony Venice 1 and Venice 2 cinema cameras over IP or serial from a Cyanview RCP or RIO for full paint and exposure control.